HP P2000 HP P2000 G3 MSA System CLI Reference Guide - Page 351

job-parameters Properties Table 40 job-parameters properties Name backgroundscrub backgroundscrub-numeric partnerfirmwareupgrade partnerfirmwareupgrade-numeric utilitypriority utilityprioritynumeric Type string string string string string string Description Shows whether disks in vdisks are automatically checked for disk defects to ensure system health. • Disabled: Background vdisk scrub is disabled. • Enabled: Background vdisk scrub is enabled. This is the default. Numeric equivalents for background-scrub values. Shows whether component firmware versions are monitored and will be automatically upgraded on the partner controller. • Disabled: Partner firmware upgrade is disabled. • Enabled: Partner firmware upgrade is enabled. This is the default. Numeric equivalents for partner-firmware-upgrade values. • 0: Disabled • 1: Enabled Priority at which data-redundancy utilities, such as vdisk verify and reconstruct, run with respect to I/O operations competing for the system's processors. (This does not affect vdisk background scrub, which always runs at "background" priority.) • High: Utilities have higher priority than host I/O. Use when your highest priority is to return the system to a fully fault-tolerant state. This can cause heavy I/O to be slower than normal. This is the default. • Medium: Utility performance is balanced with host I/O performance. • Low: Utilities run at a slower rate with minimal effect on host I/O. Use when streaming data without interruption, such as for a web server, is more important than data redundancy. Numeric equivalents for utility-priority values. • 0: High • 1: Medium • 2: Low Example # show job-parameters ... Disabled 0 Disabled 0 Medium 1 ... HP P2000 G3 MSA System CLI Reference Guide 351