HP P2000 HP StorageWorks Bezel Replacement Instructions (590360-001, February - Page 1
HP P2000 Manual
View all HP P2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
HP StorageWorks Bezel Replacement Instructions This document details procedures for replacing failed bezels on an HP StorageWorks disk enclosure. About this document • Illustrations in this document may show modules or an enclosure that differ slightly from the devices in your environment. • For the latest product documentation, see the HP website at http:// www.hp.com/support/manuals. Under the storage banner, navigate to the page for your storage enclosure. • Warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. To obtain a copy of the warranty for this product, see the warranty information website: http:// www.hp.com/ go/storagewarranty. Removing and installing bezels Several bezels are included in this kit. Use the bezel needed for your environment. To remove a bezel, grasp the bezel firmly and pull until the bezel separates from the chassis. © Copyright 2009 Hewlett-Packard Development Company, L.P. First edition: November 2009 The information in this document is subject to change without notice. Printed in the US www.hp.com To install a bezel, align the bezel with the ball nuts on the chassis ear and press firmly until the bezel clicks in place. *590360-001* Page 1