HP P2055x HP LaserJet P2050 Series - Software Technical Reference - Page 178
Set up a product with Mac OS X v10.4, Print & Fax
UPC - 883585945801
View all HP P2055x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Set up a product with Mac OS X v10.4 Carry out these steps after the software installation is complete. 1. If you are installing the product using a USB connection, connect the USB cable between the product and the computer. Turn on the product. If you are installing using a network connection, verify that the network cable is connected to the product and the product is on. 2. In the Applications folder, open the Utilities folder, and then run the Printer Setup Utility. The Printer List appears. NOTE: You can also configure the product using the Print & Fax pane of System Preferences (see Set up a product with Mac OS X v10.5 on page 158). 3. If you are installing the product using a USB connection, verify that the product appears on the Printer List. The Kind column in the printer list should display Device Series. If this is the case, the setup is complete. If the product does not appear, or if the correct information does not appear in the Kind column, see Troubleshooting the product setup on page 162. If you are installing the product using a network connection, continue with the following steps. 4. Click Add (or the + button in the Print & Fax utility) to open the Printer Browser screen. 5. You can use either Bonjour or IP Printing for the network connection. If you are using Bonjour, carry out the following steps: a. Click the Default Browser tab. b. Select the product from the list. The software verifies that the product is connected to the network and the Print Using field is automatically populated with the correct PPD for the product. NOTE: If the name does not appear in the list, verify that the product is on and connected to the network, then try turning the product off and then on again. If the Device Series PPD does not appear in the Print Using pull-down list, turn the computer off and then on again, then restart the setup process. For more troubleshooting information, see Troubleshooting the product setup on page 162. If you want to use the IP Printing method, carry out the following steps: a. Click the IP Printer tab. b. Select HP Jet Direct - Socket from the Protocol pull-down menu. This is the recommended setting for HP products. c. Print the product configuration page from the product control panel, and then find the product IP address. d. Type the IP address into the Address field. e. The Name, Location, and Print Using information will automatically be filled in. If the product PPD does not appear in the Print Using field, turn the computer off and then on again and restart the setup process. 6. Click Add. The Installable Options screen appears. 7. If the product has the optional Tray 3, select Tray 3. 160 Chapter 5 Macintosh software and utilities ENWW