HP P4014dn HP LaserJet P4010 and P4510 Series - Software Technical Reference - Page 159
Paper Size, Units, Custom width and height control limits - laserjet paper tray 2
UPC - 884420126362
View all HP P4014dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Paper Size Change the width and height values by typing numeric strings into the edit boxes in the Paper Size group box. Any entry that is greater than the maximum limits of the width and height edit box is rounded down to the maximum valid entry, while any entry that is smaller than the minimum limits of the width and height edit box is rounded up to the minimum valid entry. If units are in millimeters, the custom media-size range minimum is the limit rounded up to the nearest whole millimeter. The custom media-size range maximum is the limit rounded down to the nearest whole millimeter. Any non-numerical entry reverts to the last valid entry. Width and height entries are validated when the focus has changed. The resolution of each edit box is 1 millimeter or 1/10 of an inch, depending on the current measurement units. Units To change measurement units, click one of the options in the Units group box (either Inches or Millimeters). Custom width and height control limits The minimum media size for the HP LaserJet P4010 and P4510 Series printer is 76.2 x 127 mm (3 x 5 inches) and the maximum is 215.9 x 355.6 mm (8.5 x 14 inches). The following table summarizes media size limits. Tray or bin Tray 1 Paper type Paper and cardstock Envelopes Labels Transparencies Tray 2 and the optional 500-sheet Paper and cardstock trays Optional 1,500-sheet tray Labels Transparencies Paper Specifications Quantity Range: 60 g/m2 (16 lb) bond to 200 g/m2 (54 lb) bond Maximum stack height: 10 mm (0.6 inch) Equivalent to 100 sheets of 75 g/ m2 (20 lb) bond Less than 60 g/m2 (16 lb) bond to Up to 10 envelopes 90 g/m2 (24 lb) bond Maximum 0.23 mm (0.009 inch) Maximum stack height: 10 mm thick (0.6 inch) Minimum 0.13 mm (0.005 inch) Maximum stack height: 10 mm thick (0.6 inch) Range: 60 g/m2 (16 lb) bond to 135 g/m2 (36 lb) bond Equivalent to 500 sheets of 75 g/ m2 (20 lb) bond Maximum 0.13 mm (0.005 inch) Maximum stack height: 54 mm thick (2.1 inch) Minimum 0.13 mm (0.005 inch) Maximum stack height: 54 mm thick (2.1 inch) Range: 60 g/m2 (16 lb) bond to 135 g/m2 (36 lb) bond Equivalent to 1,500 sheets of 75 g/m2 (20 lb) bond HP PCL 5, PCL 6, and PS emulation drivers for Windows ENWW Paper/Quality tab features 137