HP P4014dn HP LaserJet P4010 and P4510 Series - User Guide - Page 162
Tray size cannot be ANY SIZE/ANY, 8X.YYYY EMBEDDED JETDIRECT ERROR
UPC - 884420126362
View all HP P4014dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Table 10-1 Control-panel messages (continued) Control panel message Description Recommended action If the error no longer exists, follow these steps. 1. Install the DIMM and EIO device one at a time, making sure to turn the product off and then on as you install each device. 2. Replace the DIMM or EIO device if you determine that it causes the error. 3. Reconnect all cables that connect the product to the network or computer. 8X.YYYY EIO ERROR The EIO accessory card in slot [X] has encountered a critical error. 1. Turn the product off and then on. 2. Turn the product off, reseat the EIO accessory in slot [X], and then turn the product on. 3. Turn the product off, remove the EIO accessory from slot [X], install it in a different EIO slot, and then turn the product on. 4. Replace the EIO accessory in slot [X]. 8X.YYYY EMBEDDED JETDIRECT ERROR The embedded HP Jetdirect print server has 1. encountered a critical error. 2. Turn the product off and then on. If the message persists, contact an HPauthorized service or support provider. Access denied MENUS LOCKED The product control-panel function you are trying to use has been locked to prevent unauthorized access. See your network administrator. ACTION NOT CURRENTLY AVAILABLE FOR TRAY X Tray size cannot be ANY SIZE/ANY CUSTOM Duplexing is not available when the tray size Change tray settings. is set to ANY SIZE or ANY CUSTOM. 1. Press Menu . 2. Press the down arrow to highlight PAPER HANDLING, and then press OK. 3. Press the down arrow to highlight the specified tray, and then press OK. 4. Change the selected tray's size and type settings. BAD DUPLEXER CONNECTION For help press The optional duplexer is not properly connected to the product. 1. Make sure that you are using the rightangle power cord that came with the product. 2. Try removing and reinstalling the optional duplexer. Then turn the product off and then on. BAD ENVELOPE FEEDER CONNECTION The optional envelope feeder is not connected properly to the product. Try removing and reinstalling the optional envelope feeder. Then, turn the product off and then on. 150 Chapter 10 Solve problems ENWW