HP P4015dn HP LaserJet P4010 and P4510 Series - User Guide - Page 156
Solve problems, Table 10-1
UPC - 884420126553
View all HP P4015dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Table 10-1 Control-panel messages (continued) Control panel message Description Recommended action 11. INTERNAL CLOCK ERROR To continue press OK The real time clock has experienced an error. Printing can continue, but a prompt will appear every time the product is turned on. To resolve the issue, contact an HPauthorized service or support provider. 13.JJ.NT DEVICE WARNING The external device sent a warning. No action is necessary. 13.JJ.NT JAM IN A jam has occurred in the specified location. Remove jammed paper from the specified location. If the message persists after all jams have been cleared, a sensor might be stuck or broken. Contact an HP-authorized service or support provider. 13.JJ.NT JAM INSIDE A jam has occurred in the specified location. Remove jammed paper from the specified location. If the message persists after all jams have been cleared, a sensor might be stuck or broken. Contact an HP-authorized service or support provider. 13.JJ.NT PAPER JAM OPEN INPUT TRAYS alternates with A jam has occurred in an input tray. 1. Open the top cover. 2. Remove the print cartridge and any paper. Open all trays 3. Reinstall the print cartridge and close the top cover. 4. Close all trays. 21 PAGE TOO COMPLEX For help press alternates with 21 PAGE TOO COMPLEX The data (dense text, rules, raster or vector 1. Press OK to print the transferred data graphics) sent to the product was too (some data might be lost). complex. 2. If this message appears often, simplify the print job or install additional memory. To continue press OK 22 EIO X BUFFER OVERFLOW To continue press OK Too much data was sent to the EIO card in 1. Press OK to clear the message. (The job the specified slot [X]. An improper will not be printed.) communications protocol might be in use. 2. Check the host configuration. If the Note: EIO 0 is reserved for the HP Jetdirect message persists, contact an HP- embedded print server. authorized service or support provider. 22 EMBEDDED I/O BUFFER OVERFLOW To continue press OK Too much data was sent to the product's internal HP Jetdirect. Press OK to continue printing. Some data may be lost. 22 USB I/O BUFFER OVERFLOW To continue press OK Too much data was sent to the USB port. Press OK to clear the error message. (The job will not be printed.) 40 EIO X BAD TRANSMISSION To continue press OK The connection has been broken between Press OK to clear the error message and the product and the EIO card in the specified continue printing. slot [X]. Note: EIO 0 is reserved for the HP Jetdirect embedded print server. 144 Chapter 10 Solve problems ENWW