HP P4015tn HP LaserJet P4010 and P4510 Series Printers Embedded Web Server - U - Page 22
Viewing product status from the HP EWS Information screens, Table 2-2 - paper tray
UPC - 883585430727
View all HP P4015tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Table 2-2 Configuration Page Callout Area on the screen 1 HP EWS tabs and menus 2 Printer Information 3 Installed Personalities and Options 4 Memory 5 Event Log 6 Security 7 Paper Trays and Options Information or capability that the area provides For more information, see Navigating through the HP Embedded Web Server on page 6. Lists the serial number, version numbers, and other information for the device. Lists: ● Version and TCP/IP address for all network devices connected to the product (Jetdirect or internal Jetdirect) ● All of the printer languages that are installed (such as printer command language [PCL] and PostScript® [PS]) ● Options that are installed in each DIMM slot and EIO slot ● USB devices that can be connected to a printer used as a host USB controller, such as mass storage devices, card swipes, or keypads Lists the memory information, PCL Driver Work Space (DWS), and resource saving information. Lists the number of active entries in the Event Log and the Event Log total capacity. Lists the status of the control-panel lock, disk write-protect options, and direct-connect (USB or parallel) ports. You can change the status of the Direct Connect ports on the Security screen under the Settings tab by selecting or clearing the Disable Direct Ports check box. To change security settings, go the Security screen under the Settings tab and select Configure Security Settings. Lists the size and type of media that is specified for each of the trays in the product. If a duplexing unit or any paper-handling accessories are installed on the product, information about those devices is also listed here. 12 Chapter 2 Viewing product status from the HP EWS Information screens ENWW