HP P4515n HP LaserJet P4010 and P4510 Series - User Guide - Page 43
Embedded Jetdirect and EIO <X> Jetdirect menus continued, Table 2-1
UPC - 883585430000
View all HP P4515n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Table 2-1 Embedded Jetdirect and EIO Jetdirect menus (continued) Menu item Sub-menu item Sub-menu item Values and Description SUBNET MASK: The subnet mask for the printer, where m is a value from 0 to 255. DEFAULT GATEWAY: The IP address of the gateway or router used for communications with other networks. DEFAULT IP Specify the IP address to default to when the print server is unable to obtain an IP address from the network during a forced TCP/IP reconfiguration (for example, when manually configured to use BootP or DHCP). AUTO IP: A link-local IP address 169.254.x.x is set. LEGACY: The address 192.0.0.192 is set, consistent with older HP Jetdirect products. PRIMARY DNS Specify the IP address (n.n.n.n) of a Primary DNS Server. SECONDARY DNS Specify the IP address (n.n.n.n) of a Secondary Domain Name System (DNS) Server. IPV6 SETTINGS ENABLE Use this item to enable or disable IPv6 operation on the print server. OFF*: IPv6 is disabled. ON: IPv6 is enabled. ADDRESS Use this item to manually configure an IPv6 address. MANUAL SETTINGS: Use the MANUAL SETTINGS menu to enable and manually configure a TCP/ IPv6 address. ENABLE: Select this item and choose ON to enable manual configuration, or OFF to disable manual configuration. ADDRESS: Use this item to type a 32 hexadecimal digit IPv6 node address that uses the colon hexadecimal syntax. DHCPV6 POLICY ROUTE SPECIFIED: The stateful auto-configuration method to be used by the print server is determined by a router. The router specifies whether the print server obtains its address, its configuration information, or both from a DHCPv6 server. ROUTER UNAVAILABLE: If a router is not available, the print server should attempt to obtain its stateful configuration from a DHCPv6 server. ALWAYS: Whether or not a router is available, the print server always attempts to obtain its stateful configuration from a DHCPv6 server. PRIMARY DNS Use this item to specify an IPv6 address for a primary DNS server that the print server should use. SECONDARY DNS Use this item to specify an IPv6 address for a secondary DNS server that the print server should use. ENWW Configure Device menu 31