HP P6130f Getting Started - Page 92
Connecting the TV signal source with a set-top box and using S-video or
UPC - 884962205631
View all HP P6130f manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Connecting the TV signal source with a set-top box and using S-video or composite video cable to the computer To use video output from the set-top box (F), add the cables to route video and audio to the computer: Do not detach any cables from the existing setup. Connect an S-video cable (or you can use an S-video-to-composite cable adapter) to the S-Video In connector (H) on the computer. Connect audio cables to the audio right (red) and left (white) connectors (J) on the computer. Connect the remote control cable/IR blaster (select models only) (G) to the IR OUT connector on the computer, and then position the blaster on the set-top box. This enables the computer to change the channel on the box. See "Using an infrared receiver (IR) blaster" on page 13 for blaster placement details. 12 Getting Started (features vary by model)