HP P920 Compaq P710/P910/P1210 Color Monitor User's Guide - Page 19

ENGLISH Adjustment Items 17" Model X: Available Items Function A B C CONTRAST Adjusts the contrast level. BRIGHT Adjusts the black level of the screen. COLOR TEMPERATURE Adjusts the color temperature of the image on the screen. HORIZ-SIZE Adjusts the horizontal size of the image on the screen. X HORIZ-PHASE Adjusts the horizontal position of the image on the screen. X VERT-SIZE Adjusts the vertical size of the image on the screen. X VERT-POSITION Adjusts the vertical position of the image on the screen. X PINCUSHION Straightens the left and right sides of the image on the screen. X KEYSTONE Adjusts the parallelism of the left and right sides of the image on the screen. X TOP-PIN Adjusts the pincushioning at the top corners of the screen. X BOTTOM-PIN Adjusts the pincushioning at the bottom corners of the screen. X PIN-BALANCE Adjusts the curvature of the left and right sides of the screen image. X KEY-BALANCE Adjusts the vertical slant or tilt of the screen image. X ROTATION Adjusts the rotation of the image. GEOMETRY RESET Restore to the factory preset level. (Only function on factory preset timing) - *MOIRE CANCEL LEVEL Adjusts the moire level on the screen. CLAMP PULSE POSITION Use this function to eliminate excessive green or white background that may occur when external sync signals are applied to the monitor. VIDEO LEVEL Selects video level 1.0V or 0.7V. (0.7V Standard) DEGAUSS Eliminates possible color shading or impurity. - POWER-SAVE When setting to ON, the power consumption of the monitor will be reduced when not in use. CONTROL LOCK Locks the OSD function to keep the screen you desired. DIAGNOSIS Indicates the current scanning frequency and factory or user preset timing number. - LANGUAGE Selects the language used on OSD screen. X X X X X X X -X -X X -X A. Press "GEOMETRY RESET" to restore to the factory preset level. B. Press and buttons together, to restore to the factory preset level. C. Set data does not change by the change of the signal timing. *Moire is a series of wavy patterns caused by the interference between the aperture grille of the CRT and the raster generated by the video card. Adjust the level to the minimum value at which moire is no longer observed. - 8 -