HP PSC 2400 HP PSC 2400 Photosmart series All-in-One - (English) Setup Poster - Page 1

*Q3083-90188* *Q3083-90188* Q3083 - 90188 1 Windows Users START HERE 2 Turn your computer on This side of the poster is for Windows users. Make sure you are using the CD and side of the poster that matches your operating system. 4 Attach front panel cover a Remove any packaging material. b Place the front panel cover over the buttons. Firmly press on all sides to snap the cover in place. Make sure all the buttons are visible. c Lift the display. a Turn on your computer and wait for the Windows desktop to appear. b Close any open programs. 7 Connect supplied phone cord a You must connect the supplied phone cord to the phone jack on the left (1-LINE). b To connect an answering machine or use your own phone cord, see the Fax Setup chapter in the Reference Guide. 1-LINE 3 Begin software installation a Insert the HP PSC Windows CD. b Follow the onscreen instructions. If the software does not appear on your computer screen after inserting the CD, see the Troubleshooting Information chapter in the Reference Guide. c Do not connect the USB cable yet. When you see the Setup your Device Now dialog box, continue to step 4. 5 Load paper Use plain white paper to prepare for print alignment. a b c d 8 Connect USB cable Make sure that you see the screen in step 3 before plugging in your USB cable. Do not connect the USB cable to a keyboard. 6 Connect power cords c a b 9 Turn HP PSC on a Turn power on. b Wait for the print cartridge message to appear, and then continue to the next step. 10 Insert and align print cartridges 11 Finish software installation Windows setup poster hp psc 2400 photosmart series all-in-one www.hp.com/support Copyright Hewlett-Packard Company 2003 Printed in US. Tri-Color Black a Make sure the power is on. Lift the print carriage door up until it catches. Lift the blue and gray latches. b Remove the bright pink tape from both print cartridges. Do not touch the gold-colored contacts or retape the cartridges. c Hold the black print cartridge with the HP label on top. Slide the cartridge underneath the metal bar into the right (gray latch) side of the print carriage. d Press down on the gray latch until it locks into place. Insert the color cartridge on the left side, and lock into place. e Make sure both latches are locked into position. Close the door. f Press OK on the front panel to begin alignment. After a page prints, alignment is complete. Discard or recycle this page. a Hardware setup is complete. Return to your computer. On the dialog box with the green checkmark, click Next. Depending on your system, it may take 20 minutes or more to finish installing the software. b After you restart your computer, the Fax Setup Wizard appears. Follow the onscreen instructions. When you see the Congratulations! dialog box, you are ready to use your HP PSC. If you encounter any problems during setup, see the Reference Guide.