HP PageWide 6000 User Guide - Page 91
Front-panel menu items, Gigabit Ethernet
View all HP PageWide 6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Front-panel menu items To access the printer network configuration settings, go to the front panel and tap Gigabit Ethernet. , then , then Menu item Information TCP/IP Sub-menu item Print Sec Report Host Name IPV4 Settings Sub-menu item Config Method DHCP Release DHCP Renew Manual Settings Values and Description Yes : Prints a report. No (default): Does not print a report. An alphanumeric string, up to 32 characters, used to identify the device. This name is listed on the HP Jetdirect configuration page. The default host name is NPIxxxxxx, where xxxxxx is the last six digits of the LAN hardware (MAC) address. Specifies the method that TCP/IPv4 parameters will be configured on the HP Jetdirect print server. Bootp : Use BootP (Bootstrap Protocol) for automatic configuration from a BootP server. DHCP (default): Use DHCP (Dynamic Host Configuration Protocol) for automatic configuration from a DHCPv4 server. If selected and a DHCP lease exists, DHCP Release and DHCP Renew menus are available to set DHCP lease options. Auto IP : Use automatic link-local IPv4 addressing. An address in the form 169.254.x.x is assigned automatically. Manual : Use the Manual Settings menu to configure TCP/ IPv4 parameters. This menu appears if Config Method was set to DHCP and a DHCP lease for the print server exists. No (default): The current DHCP lease is saved. Yes : The current DHCP lease and the leased IP address are released. This menu appears if Config Method was set to DHCP and a DHCP lease for the print server exists. No (default): The print server does not request to renew the DHCP lease. Yes : The print server requests to renew the current DHCP lease. (Available only if Config Method is set to Manual ) Configure parameters directly from the printer control panel: IP Address : The unique IP address of the printer (n.n.n.n). Subnet Mask : The subnet mask for the printer (n.n.n.n). Syslog Server : The IP address of the syslog server (n.n.n.n) used to receive and log syslog messages. Default Gateway : The IP address (n.n.n.n) of the gateway or router used for communications with other networks. Idle Timeout : The time period, in seconds, after which an idle TCP print data connection is closed (default is 270 seconds, 0 disables the timeout). ENWW Front-panel menu items 85