HP Pavilion 10 HP Pavilion 10 Notebook PC Maintenance and Service Guide - Page 39
Lift the base enclosure to remove it., Reverse this procedure to install the base enclosure.
![]() |
View all HP Pavilion 10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
4. Remove the following covers and eight Phillips screws that secure the base enclosure to the computer: NOTE: Rubber screw covers are available in the Rubber Kit, spare part number 758641-001. 5. Remove the four Phillips 6.0×2.5 screws on the back side of the base enclosure. 6. Lift the base enclosure to remove it. Reverse this procedure to install the base enclosure. Component replacement procedures 29
![](/manual_guide/products/hewlettpackard-pavilion-10-touchsmart-10zf100-hp-pavilion-10-notebook-pc-maintenance-service-guide-33183fa/39.png)
4.
Remove the following covers and eight Phillips screws that secure the base enclosure to the
computer:
NOTE:
Rubber screw covers are available in the Rubber Kit, spare part number 758641-001.
5.
Remove the four Phillips 6.0×2.5 screws on the back side of the base enclosure.
6.
Lift the base enclosure to remove it.
Reverse this procedure to install the base enclosure.
Component replacement procedures
29