HP Pavilion 11-h110ca HP Pavilion 11 x2 PC Maintenance and Service Guide - Page 50
Vibrator module, built into the display panel
View all HP Pavilion 11-h110ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Vibrator module Description Vibrator module (includes cable) Spare part number 741723-001 Before removing the vibrator module, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the display enclosure (see Display enclosure on page 31). 5. Disconnect the tablet battery cable from the system board (see Sensor board on page 32). Remove the vibrator module: 1. Disconnect the vibrator module cable (1) from the system board. 2. Release the vibrator module cable from the routing clips (2) built into the display panel assembly. 3. Release the vibrator module (3) from the mold built into the display panel assembly. 4. Remove the vibrator module and cable. Reverse this procedure to install the vibrator module. 42 Chapter 5 Removal and replacement procedures