HP Pavilion 11-k000 Maintenance and Service Guide - Page 41

and the keyboard cable, Disconnect the touchpad cable

Get HP Pavilion 11-k000 PDF manuals and user guides View all HP Pavilion 11-k000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

6. Run a plastic, non-marking tool around the seam to disengage the top cover from the computer. Separate the top cover from the computer by separating and lifting up at the seam on the left side (1), top (2), and right side (3), far enough to access the keyboard and touchpad connectors on the system board. NOTE: You can use a plastic, non-marking tool inserted in the seam to disengage the top cover. NOTE: When you lift the top cover, the keyboard cable and the touchpad cable are connected to the system board. Be sure not to pull the cables loose when lifting the bottom cover. 7. Disconnect the touchpad cable (1) and the keyboard cable (2) from the system board, and then remove the top cover from the computer (3). Reverse this procedure to install the top cover. Component replacement procedures 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
6.
Run a plastic, non-marking tool around the seam to disengage the top cover from the computer.
Separate the top cover from the computer by separating and lifting up at the seam on the left side
(1)
,
top
(2)
, and right side
(3)
, far enough to access the keyboard and touchpad connectors on the system
board.
NOTE:
You can use a plastic, non-marking tool inserted in the seam to disengage the top cover.
NOTE:
When you lift the top cover, the keyboard cable and the touchpad cable are connected to the
system board. Be sure not to pull the cables loose when lifting the bottom cover.
7.
Disconnect the touchpad cable
(1)
and the keyboard cable
(2)
from the system board, and then remove
the top cover from the computer
(3)
.
Reverse this procedure to install the top cover.
Component replacement procedures
33