HP Pavilion 11-n030ca HP Pavilion 11 x360 PC Maintenance and Service Guide - Page 67
Power connector cable, Disconnect the power connector cable
View all HP Pavilion 11-n030ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Power connector cable Description Power connector cable Spare part number 755727-001 Before removing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Remove the battery (see Battery on page 49). Remove the power connector cable: 1. Remove the black Phillips PM2.5×6.0 screw (1) that secures the bracket to the computer and the silver Phillips PM3.0×5.0 screw (2) that secures the right display hinge. 2. Open the display assembly right hinge (3) as far as it will open. 3. Remove the bracket from the computer (4). 4. Disconnect the power connector cable (5) from the system board. 5. Remove the power connector (6) from the computer. 6. Remove the power connector cable. Reverse this procedure to install the power connector cable. Component replacement procedures 59