HP Pavilion 12 Maintenance and Service Guide - Page 52
Keyboard/base removal and replacement procedures, Bottom cover
View all HP Pavilion 12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
6 Keyboard/base removal and replacement procedures CAUTION: Keyboard/base components described in this chapter should only be accessed by an authorized service provider. Users accessing these parts can damage the keyboard/base or void the warranty. NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for the keyboard/base, go to http://partsurfer.hp.com, select the country or region, and then follow the on-screen instructions. Keyboard/base component replacement procedures There are as many as 24 screws that must be removed, replaced, and/or loosened when servicing the keyboard/base. Make special note of each screw size and location during removal and replacement. Bottom cover Description Bottom cover Spare part number 841544-001 Before disassembling the keyboard/base, follow these steps: 1. Turn off the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then shut it down through the operating system. 2. Disconnect the power from the slate by unplugging the power cord from the slate. 3. Disconnect all external devices from the slate. 4. Disconnect the slate from the keyboard/base. Remove the bottom cover: 1. Turn the keyboard/base upside down with the front toward you. 2. Remove the keyboard/base rubber foot strip (1). 3. Remove the keyboard/base screw covers (2). The keyboard/base rubber foot strip and the screw covers are available in the Rubber Kit, spare part number 841568-001. 4. Remove the four Phillips PM2.0×3.8 screws (3) that secure the bottom cover to the keyboard/top cover. 44 Chapter 6 Keyboard/base removal and replacement procedures