HP Pavilion 13-a041ca HP Pavilion x360 Convertible PC Maintenance and Service - Page 66
and system board until it rests at an angle.
View all HP Pavilion 13-a041ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
4. Remove the six Phillips PM2.4×5.7 screws (4) that secure the system board to the bottom cover. 5. Flex the left side of the bottom cover (1) until the heat sink has clearance for release. 6. Lift the left side of the heat sink (2) and system board until it rests at an angle. 7. Remove the heat sink (3) and system board by sliding them up and to the left at an angle. Reverse this procedure to install the system board. 58 Chapter 5 Removal and replacement procedures
4.
Remove the six Phillips PM2.4×5.7 screws
(4)
that secure the system board to the bottom cover.
5.
Flex the left side of the bottom cover
(1)
until the heat sink has clearance for release.
6.
Lift the left side of the heat sink
(2)
and system board until it rests at an angle.
7.
Remove the heat sink
(3)
and system board by sliding them up and to the left at an angle.
Reverse this procedure to install the system board.
58
Chapter 5
Removal and replacement procedures