HP Pavilion 13-a100 Pavilion x360 Convertible PC Maintenance and Service Guide - Page 42
Hard drive
View all HP Pavilion 13-a100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Hard drive NOTE: The hard drive spare kit does not include the hard drive bracket or hard drive connector adapter. The hard drive bracket and hard drive connector adapter are included in the Hard Drive Hardware Kit, spare part number 768020-001. Description 1-TB, 5400-rpm 750-GB, 5400-rpm 500-GB, 5400-rpm 500-GB, 5400-rpm, Hybrid 8-GB Solid State drives 128-GB, SATA-3, multi-level cell, solid-state drive (MLC) 128-GB, SATA-3, triple-level cell, solid-state drive (TLC) 256-GB, SATA-3, multi-level cell, solid-state drive (MLC) 256-GB, SATA-3, triple-level cell, solid-state drive (TLC) 128-GB, SATA-3, multi-level cell, solid-state drive 128-GB, SATA-3, triple-level cell, solid-state drive 256-GB, SATA-3, multi-level cell, solid-state drive 256-GB, SATA-3, triple-level cell, solid-state drive Spare part number 762990-005 752099-005 683802-006 732000-005 767763-001 767764-001 781942-001 781943-001 767763-001 767764-001 767764-001 781943-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 27). 5. Disconnect the battery cable from the system board (see Battery on page 31). Remove the hard drive: 1. Release the ZIF connector (1) to which the hard drive cable is attached, and then disconnect the hard drive cable from the system board. 2. Remove the two PM2.4×3.8 screws (2) that secure the hard drive to the bottom cover. 32 Chapter 5 Removal and replacement procedures