HP Pavilion 13-a200 Pavilion x360 Convertible PC Maintenance and Service Guide - Page 60

and the heat sink, board each time the heat sink is removed. Thermal paste is used on the processor

Get HP Pavilion 13-a200 PDF manuals and user guides View all HP Pavilion 13-a200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

1. Turn the system board upside down with the front toward you. 2. Loosen the four captive screws (1) that secure the heat sink to the system board. NOTE: Due to the adhesive quality of the thermal material located between the heat sink and system board components, it may be necessary to move the heat sink from side to side to detach it. 3. Remove the heat sink (2). NOTE: The thermal material must be thoroughly cleaned from the surfaces of the heat sink and the system board each time the heat sink is removed. Thermal paste is used on the processor (1) and the heat sink section (2) that services it. Reverse this procedure to install the heat sink. 50 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
1.
Turn the system board upside down with the front toward you.
2.
Loosen the four captive screws
(1)
that secure the heat sink to the system board.
NOTE:
Due to the adhesive quality of the thermal material located between the heat sink and system
board components, it may be necessary to move the heat sink from side to side to detach it.
3.
Remove the heat sink
(2)
.
NOTE:
The thermal material must be thoroughly cleaned from the surfaces of the heat sink and the system
board each time the heat sink is removed. Thermal paste is used on the processor
(1)
and the heat sink
section
(2)
that services it.
Reverse this procedure to install the heat sink.
50
Chapter 5
Removal and replacement procedures