HP Pavilion 14-bf000 Maintenance and Service Guide - Page 47

Fan, To remove the fan

Get HP Pavilion 14-bf000 PDF manuals and user guides View all HP Pavilion 14-bf000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Fan Description Fan Spare part number 930603-001 NOTE: To properly ventilate the computer, allow at least 7.6 cm (3.0 in) of clearance on the left side of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist. These conditions are affected by high external temperatures, system power consumption, power management/battery conservation configurations, battery fast charging, and software requirements. Exhaust air is displaced through the ventilation grill located on the left side of the computer. Before removing the fan, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 27). 5. Remove the battery (see Battery on page 29). To remove the fan: 1. Remove the two Phillips PM2.0×4.0 screws (1) that secure the fan to the computer. 2. Lift the fan up enough to access the cable and connector on the system board (2). 3. Disconnect the fan cable from the system board (3). Reverse this procedure to install the fan. IMPORTANT: Be sure to connect the fan cable to the system board connector first when installing the fan. Component replacement procedures 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
Fan
Description
Spare part number
Fan
930603-001
NOTE:
To properly ventilate the computer, allow at least
7.6 cm
(3.0 in) of clearance on the left side of the
computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and
is designed to turn on automatically when high temperature conditions exist. These conditions are
affected
by
high external temperatures, system power consumption, power management/battery conservation
configurations,
battery fast charging, and software requirements. Exhaust air is displaced through the
ventilation grill located on the left side of the computer.
Before removing the fan, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
27
).
5.
Remove the battery (see
Battery
on page
29
).
To remove the fan:
1.
Remove the two Phillips PM2.0×4.0 screws
(1)
that secure the fan to the computer.
2.
Lift the fan up enough to access the cable and connector on the system board
(2)
.
3.
Disconnect the fan cable from the system board
(3)
.
Reverse this procedure to install the fan.
IMPORTANT:
Be sure to connect the fan cable to the system board connector
first
when installing the fan.
Component replacement procedures
39