HP Pavilion 14-v100 Pavilion 14 Notebook PC Maintenance and Service Guide 1 - Page 64
Heat sink assembly, Turn the system board upside down, with the front toward you.
View all HP Pavilion 14-v100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Heat sink assembly Description Spare part number Heat sink for use only on computer models equipped with AMD processors and UMA graphics 19 W 764080-001 Heat sink for use only on computer models equipped with AMD processors and AMD UMA graphics 25 W 764082-001 Heat sink for use only on computer models equipped with AMD processors and switchable discrete graphics 25 W 764083-001 Before removing the heat sink assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 29), and then remove the following components: a. Service door (see Service door on page 30) b. Optical drive (see Optical drive on page 32) c. Top cover (see Top cover on page 39) d. System board (see System board on page 49) e. Fan (see Fan on page 52) Remove the heat sink assembly: 1. Turn the system board upside down, with the front toward you. NOTE: Steps 2 through 4 apply to computer models equipped with switchable discrete graphics. See steps 5 through 7 for heat sink assembly removal information for computer models equipped with UMA graphics. 2. Remove the four Phillips M2.5x4.0 screws (1) and the three Phillips PM2.5x4.0 screws (2) that secure the heat sink assembly to the system board. 54 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts