HP Pavilion 14-v200 Pavilion 14 Notebook PC Maintenance and Service Guide 1 - Page 60
Remove the five Phillips M2.5x4.0 screw, that secure the system board to the base enclosure.
View all HP Pavilion 14-v200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
1. Disconnect the following cables from the system board: ● Display panel cable (1) ● Speaker cable (2) ● Hard drive cable (3) ● USB/audio board cable (4) 2. Remove the five Phillips M2.5x4.0 screw (1) that secure the system board to the base enclosure. 3. Lift the right side of the system board (2) until it rests at an angle. 50 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
1.
Disconnect the following cables from the system board:
●
Display panel cable
(1)
●
Speaker cable
(2)
●
Hard drive cable
(3)
●
USB/audio board cable
(4)
2.
Remove the five Phillips M2.5x4.0 screw
(1)
that secure the system board to the base enclosure.
3.
Lift the right side of the system board
(2)
until it rests at an angle.
50
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts