HP Pavilion 15-n200 Maintenance and Service Guide - Page 69
Hard drive, Memory module see
View all HP Pavilion 15-n200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Hard drive NOTE: The hard drive spare part kit includes the hard drive rubber bracket and screws. These components are included in the Hard Drive Hardware Kit, spare part number 732071-001. Description 1 TB, 5400 rpm, 7.0 mm/9.5 mm 750 GB, 5400 rpm, 9.5 mm 500 GB, 5400 rpm, 9.5 mm 500 GB, 5400 rpm, 7.0 mm 1 TB, 5400 rpm + 8 GB NAND hybrid, 9.5 mm, for use with computer models with Intel processors 750 GB 5400 rpm + 8 GB NAND hybrid, 9.5 mm, for use with computer models with Intel processors 500 GB 5400 rpm + 8 GB NAND hybrid, 7 mm, for use with computer models with Intel processors Hard Drive Hardware Kit (not illustrated, includes hard drive rubber bracket, 2 hard drive retention brackets, and hard drive connector cable). Spare part number 676521-005 634250-005 669299-005 683802-005 731999-005 732001-005 732000-005 732071-001 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 40), and then remove the following components: a. Optical drive (see Optical drive on page 45). b. Service door (see Service door on page 42). c. WLAN module (see WLAN module on page 44). d. Memory module (see Memory module on page 42). e. Keyboard (see Keyboard on page 51). f. Top cover (see Top cover on page 55). Remove the hard drive: 1. Disconnect the USB/audio cable (1) by flipping open the ZIF connector and lifting the cable. Remove the USB/audio cable Phillips M 2.5×3.0 screw (2) and then lift the USB/audio board (3). Component replacement procedures 59