HP Pavilion 27-r000 Graphics Card Replacement Instructions - Page 2
Remove the SLI bridge, if installed: Lift the bridge up
![]() |
View all HP Pavilion 27-r000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
3. To remove the access panel: Slide the release latch (1), and then slide the panel back and pull it away from the computer (2). 4. Locate the graphics card: 1. Memory modules 2. Liquid-filled heat sink 3. Graphics cards NOTE: All graphics cards are removed using the same procedures. 5. Remove the SLI bridge, if installed: Lift the bridge up from atop the graphics cards. 6. Remove the graphics card bracket: Remove the three screws (1), and then lift the bracket off the graphics card (2). 936167-001 2
![](/manual_guide/products/hewlettpackard-pavilion-pc-24r000a-graphics-card-replacement-instructions-ac7c451/2.png)
936167-001
2
3.
To remove the access panel:
Slide the release latch
(1)
, and then slide the panel back
and pull it away from the computer
(2)
.
4.
Locate the graphics card:
1.
Memory modules
2.
Liquid-filled heat sink
3.
Graphics cards
NOTE:
All graphics cards are removed using the same
procedures.
5.
Remove the SLI bridge, if installed: Lift the bridge up
from atop the graphics cards.
6.
Remove the graphics card bracket: Remove the three
screws
(1)
, and then lift the bracket off the graphics
card
(2)
.