HP Pavilion 700 HP Pavilion Desktop PCs - (English) QUICK START GUIDE US/CTO P - Page 55
Using multi-channel, audio speakers, To connect your multi-channel, speaker system to the PC
View all HP Pavilion 700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Basics For information on adjusting the sound level, refer to "Adjusting speaker volume" on page 29. Using multi-channel audio speakers If your PC has multi-channel speakers capability (select models only), you can connect speakers for 4 channel or 6 channel output. You must connect your speaker system to the PC and then configure the audio software for sound output. Note: Multi-channel audio uses the Microphone, Audio (Line) In, and Audio (Line) Out connectors on the back of the PC to connect the multi-channel speakers system to the PC. Refer to "PC Back" (in the "Start Here" section) for the location of the connectors. To connect your multi-channel speaker system to the PC 1 Turn off the PC. 2 Connect the three audio cable plugs from the speaker system to the connectors on the back of the PC (see the following table). Connect speaker channels (plugs) Front speakers Rear speakers Center/subwoofer speakers To PC back connector Audio (Line) Out (lime-green) Audio (Line) In (blue) Mic-1 (pink) 3 Turn on the PC. 4 Turn on your speaker system. 5 Configure the multi-channel audio output; refer to the next procedure. Quick Start Guide 27