HP Pavilion 8700 HP Pavilion PC's - (English) Seagate Hard Drive U Series 5 Ma - Page 27
Drive mounting
View all HP Pavilion 8700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
20 U Series 5 Family Product Manual, Rev. B 2.1 Drive mounting You can mount the drive in any orientation using four screws in the sidemounting holes or four screws in the bottom-mounting holes. See Figure 3 on page 20 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive: • Allow a minimum clearance of 0.030 inches (0.76 mm) around the entire perimeter of the drive for cooling. • Use only 6-32 UNC mounting screws. Insert the screws no more than 0.20 inch (5.08 mm) into the bottom mounting holes and no more than 0.14 inch (3.55 mm) into the side mounting holes. • Do not overtighten the mounting screws (maximum torque: 6 inch-lb). • Do not use a drive interface cable that is more than 18 inches long. Note: Dimensions are shown in inches (mm). 1.00 ± 0.028 (25.4 ± 0.7) 3X 6-32 UNC-2B max. insertion depth 0.14 (3.6) both sides 0.230 ± 0.015 (5.84 ± 0.38) 2.23 ± 0.03 (56.6 ± 0.8) 3.72 ± 0.03 (94.5 ± 0.8) 0.180 ± 0.015 (4.57 ± 0.38) 4.000 ± 0.010 (101.60 ± 0.25) 5.75 ± 0.03 (146.1 ± 0.8) 2.362 ± 0.010 (59.99 ± 0.25) 4X 6-32 UNC-2B max. insertion depth 0.22 (5.6) 1.750 ± 0.010 (44.45 ± 0.25) 2.375 +0.030, -0.005 (60.33 +0.76, -0.13) 0.630 +0.030, -0.005 (16.00 +0.76, -0.13) 3X.250 ± .015 (6.35 ± 0.38) (both sides) Recommended case temperature measurement location 0.125 +0.030, -0.005 (3.18 +0.76, -0.13) 3.750 ± 0.010 (95.25 ± 0.25) 4.00 ± 0.02 (101.6 ± 0.5) Recommended case temperature measurement location Figure 3. Mounting dimensions-top, side and end view