HP Pavilion HDX9002TX HP Pavilion HDX Entertainment Notebook PC - Maintenance - Page 69
Fingerprint reader board, Hard drive see
View all HP Pavilion HDX9002TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
9. Lift the rear edge of the top cover (2) until the top cover disengages from the computer. 10. Remove the top cover. Reverse this procedure to install the top cover. Fingerprint reader board Description Fingerprint reader board (includes cable) Spare part number 448166-001 Before removing the fingerprint reader board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 38). 5. Remove the following components: a. Hard drive (see Hard drive on page 45) b. Optical drive (see Optical drive on page 52) c. Keyboard (see Keyboard on page 54) d. Hinge cover (see Hinge cover on page 56) e. Rear cover (see Rear cover on page 57) f. Top cover (see Top cover on page 59) Component replacement procedures 61