HP Pavilion HDX9109TX HP Pavilion HDX Entertainment Notebook PC - Maintenance - Page 95
Video board heat sink
View all HP Pavilion HDX9109TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Video board heat sink Description Video board heat sink (includes replacement thermal material) Spare part number 448176-001 Before removing the video board heat sink, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 38). 5. Remove the following components: a. Hard drive (see Hard drive on page 45) b. Optical drive (see Optical drive on page 52) c. Keyboard (see Keyboard on page 54) d. Hinge cover (see Hinge cover on page 56) e. Rear cover (see Rear cover on page 57) f. Top cover (see Top cover on page 59) g. Subwoofer (see Subwoofer on page 72) h. System board (see System board on page 76) Remove the video board heat sink: 1. Turn the system board upside down, with the front toward you. 2. Disconnect the video board fan cable (1) from the system board. 3. Loosen the two Phillips PM2.5×9.0 captive screws (2) and the four silver Phillips PM2.0×5.0 captive screws (3) that secure the video board heat sink to the system board. Component replacement procedures 87