HP Pavilion HDX9290LA HP Pavilion HDX Entertainmet Series Notebook PC - Mainte - Page 66
Before removing the TouchPad on/off board, follow these steps, Top cover see
View all HP Pavilion HDX9290LA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Before removing the TouchPad on/off board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 36). 5. Remove the following components: a. Hard drive (see Hard drive on page 42) b. Optical drive (see Optical drive on page 49) c. Keyboard (see Keyboard on page 50) d. Hinge cover (see Hinge cover on page 52) e. Rear cover (see Rear cover on page 53) f. Top cover (see Top cover on page 55) Remove the TouchPad on/off board: 1. Turn the top cover upside down, with the front toward you. 2. Remove the two silver Phillips PM2.0×4.0 screws (1) that secure the TouchPad on/off board to the top cover. 3. Remove the TouchPad on/off board (2). Reverse this procedure to install the TouchPad on/off board. Component replacement procedures 59