HP Pavilion Media Center m7400 HP Media Center PC Getting Started Guide - Page 69

Using the memory card reader 1 Insert the media into the correct card slot on the reader until it stops. The activity light (A) on the memory card reader lights, and the PC automatically detects the media. 2 An Autoplay window opens. Select a program to access your files. The PC opens a program so you can access the media contents. You can copy files from or to the media. Or If the Autoplay window does not open, you can click Start, click My Computer, and then double-click the memory card icon to display the files on the memory card. 3 When you are finished, right-click the drive icon, select Eject, check that the activity light is on but not blinking, and then remove the media. A steady light indicates that the PC is not reading or writing the media. w Do not try to remove media when the inuse light is blinking. Doing so may cause loss of data. Understanding the activity light The memory card reader activity light is off when there are no media cards plugged into the four slots. The light turns on when a media card is inserted into a slot. The light blinks when data is being transferred between the card and the PC. Memory Insertion Guide A B D C E n Media must be inserted correctly. Note the direction of the notched corner on the media. See the "Memory Insertion Guide" on page 65. CompactFlash and Microdrive are keyed and cannot be inserted incorrectly. Insert the receptacle edge (holes) of this media into the slot. A In-use light (indicates data is being read or written) B SmartMedia/xD C CompactFlash I/II or Microdrive D MMC/SD (MultiMedia Card/Secure Digital) E MS/MS-Pro (Memory Stick or Memory Stick Pro) Using the PC Hardware 65