HP Pavilion Media Center m8400 Upgrading and Servicing Guide - Page 11
For a Serial ATA, Gently pull back and hold the drive bay release
View all HP Pavilion Media Center m8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
4 Squeeze the tabs on the Personal Media Drive bay connector and remove the cable (A). Disconnecting the Parallel ATA hard disk drive cables 6 Remove the two screws on the front of the drive bay. 7 Gently pull back and hold the drive bay release tab while pulling out the drive bay from the front of the PC. 5 Disconnect the power cable and data cable from the back of the hard disk drive (B). For a Serial ATA drive, press the latch (1) (select models only) in the center of each plug and pull the plug (2) from the drive connector. For a Parallel ATA drive, use a gentle rocking motion to free the plug. 8 Gently lay the drive bay flat with the hard disk drive on top. Disconnecting the Serial ATA hard disk drive cables Upgrading and Servicing Guide 7