HP Pavilion Notebook - 14-v138ca HP Pavilion 14 Notebook PC HP Pavilion 14 Tou - Page 77
Power connector cable
View all HP Pavilion Notebook - 14-v138ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Power connector cable Description Power connector cable (includes bracket) Spare part number 767246-001 Before removing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 37), and then remove the following components: a. Service door (see Service door on page 38) b. Optical drive (see Optical drive on page 40) c. Top cover (see Top cover on page 47) d. System board (see System board on page 57) Remove the power connector board: NOTE: One of the power connector bracket screws was removed when removing the system board. 1. Turn the system board upside down, with the front toward you. 2. Remove the Phillips P2.5x4.0 screw from the power bracket (1). 3. Remove the power bracket (2). 4. Release the power connector from the clip built into the system board (3). Component replacement procedures 67