HP Pavilion Notebook - 14-v168nr HP Pavilion 14 Notebook PC HP Pavilion 14 Tou - Page 64
TouchPad button board
View all HP Pavilion Notebook - 14-v168nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
3. Remove the power button board (2) with cable (the cable was disconnected from the system board when removing the top cover). Reverse this procedure to install the power button board. TouchPad button board Description TouchPad button board (includes cable), Ash silver TouchPad button board (includes cable), Ano silver Spare part number 767256-001 767257-001 Before removing the TouchPad button board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 37), and then remove the following components: a. Service door (see Service door on page 38) b. Optical drive (see Optical drive on page 40) c. Top cover (see Top cover on page 47) Remove the TouchPad button board: 1. Turn the top cover upside down, with the front toward you. 2. Remove the two Phillips PM4.5x2.0 broadhead screws (1) that secure the TouchPad button board bracket to the top cover. 54 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts