HP Pavilion Slimline s3200 Getting Started Guide - Page 38
Connecting Digital Audio
View all HP Pavilion Slimline s3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
6 Turn on the receiver/amplifier. 7 Select the receiver/amplifier input that the Y adapter cables are plugged into. 8 Turn on the computer. 9 After the audio system is connected to the computer, configure the audio software for sound output for your computer model. See "Connecting Speakers or Microphone." Type 3: See "Configuring Audio Output with Multichannel Sound Manager." Type 6: See "Configuring Audio Output with Sound Effect Manager." Sound card: See "Configuring Audio Output with a Sound Card." Connecting Digital Audio (Select models only) If you have a sound card and you are connecting your home stereo AV receiver via digital out, plug the 3.5 mm stereo plug into the Digital Out connector on the sound card. Connect the red RCA stereo plug on the 3.5 mm Y adapter cable to the AV receiver's digital input connector. If the red RCA stereo plug does not work, try the white stereo plug. One of the connectors is not used. To connect digital audio, your computer must include a digital out connector on the sound card or on the back panel. You do not need to connect multichannel speaker outputs if you connect the digital output. To connect digital audio speakers: 1 Turn off the computer. 2 Connect the Digital Out connector on the back panel of your computer to the digital input (S/PDIF) on digital speakers or a digital audio system. 3 6 S NOTE: Type 3 is three connectors. Type 6 is six connectors. Type S is sound card. 3 Turn on the computer. NOTE: Always turn on the computer before you turn on the speaker system. 30 Getting Started