HP Pavilion TouchSmart 11-e115nr HP 210 G1 Notebook PC HP Pavilion 11 Notebook - Page 77
Media card reader board, Remove the Phillips PM2.0×4.5 screw
View all HP Pavilion TouchSmart 11-e115nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Media card reader board Description Media card reader board (includes cable) Spare part number 730897-001 Before removing the media card reader board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 40), and then remove the following components: a. Service door (see Service door on page 41) b. Display assembly (see Display assembly on page 53) c. Bottom cover (see Bottom cover on page 61) Remove the media card reader board: 1. Release the ZIF connector (1) to which the media card reader board cable is attached, and then disconnect the media card reader board cable from the system board. 2. Remove the Phillips PM2.0×4.5 screw (2) that secures the media card reader board to the top cover. 3. Remove the media card reader board (3) and cable. Reverse this procedure to install the media card reader board. Component replacement procedures 67