HP Pavilion TouchSmart 14-n000 Maintenance and Service Guide - Page 84
Reverse this procedure to reassemble and install the hard drive., Remove the bracket
![]() |
View all HP Pavilion TouchSmart 14-n000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
3. Disconnect the hard drive connector cable from the hard drive. 4. If it is necessary to disassemble the hard drive, perform the following steps: a. Remove the four Phillips M3.0×3.5 screws (1) from the bracket. b. Remove the bracket (2) from the hard drive. Reverse this procedure to reassemble and install the hard drive. 74 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
![](/manual_guide/products/hewlettpackard-pavilion-14n000-maintenance-service-guide-d46e10b/84.png)
3.
Disconnect the hard drive connector cable from the hard drive.
4.
If it is necessary to disassemble the hard drive, perform the following steps:
a.
Remove the four Phillips M3.0×3.5 screws (1) from the bracket.
b.
Remove the bracket
(2)
from the hard drive.
Reverse this procedure to reassemble and install the hard drive.
74
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts