HP Pavilion TouchSmart 14z-n100 HP Pavilion 14 Notebook PC HP Pavilion TouchSm - Page 85
Remove the 2 Phillips M2.5×5.0 screws
View all HP Pavilion TouchSmart 14z-n100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
2. Remove the Phillips PM2.5×6.5 screw (1) that secures the power connector bracket to the base enclosure. Remove the power connector bracket (2). 3. Remove the 2 Phillips M2.5×5.0 screws (1) that secure the system board to the base enclosure. 4. Lift the right side of the system board (2) until it rests at an angle. Component replacement procedures 75
2.
Remove the Phillips PM2.5×6.5 screw
(1)
that secures the power connector bracket to
the base enclosure. Remove the power connector bracket
(2)
.
3.
Remove the 2 Phillips M2.5×5.0 screws
(1)
that secure the system board to the base enclosure.
4.
Lift the right side of the system board
(2)
until it rests at an angle.
Component replacement procedures
75