HP Pavilion a400 HP Pavilion Desktop PCs - (English/Arabic) Warranty and Suppo - Page 18
Regulatory and Safety Information - memory
View all HP Pavilion a400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Regulatory and Safety Information WARNING: The HP Pavilion is heavy; be sure to use ergonomically correct lifting procedures when moving the computer. WARNING: Electrostatic discharge (ESD) can damage disk drives, add-in cards, and other components. If an ESD station is not available, wear a wrist strap attached to a metal part of the computer. Place cards on a conductive foam pad or inside the conductive wrapper they came in; do not place the cards on top of the wrapper. WARNING: Do not operate the system with the cover removed. Always replace the cover before turning on the system. WARNING: Please read the "Additional Safety Information" located later in this document before installing and connecting your system to the electrical power system. WARNING: Using the wrong type of memory module could damage the system. WARNING: Do not pull the memory module out of the socket. Use the retaining clips to eject the module. WARNING: Do not overload the system by installing add-in cards that draw excessive current. The system is designed to provide 2 amps (average) of +5 V power for each board/card in the computer. The total +5 V current draw in a fully loaded system (one with all add-in card slots filled) must not exceed the total number of slots multiplied by 2 amps. WARNING: Be careful of the sharp edges on the expansion slot cover. WARNING: There is danger of an explosion if the battery is incorrectly replaced. Replace only with the same, or equivalent, type of battery. Discard used batteries according to the manufacturer's instructions. ENERGY STAR Compliance Hewlett-Packard Pavilion PCs and Monitors marked with the ENERGY STAR® logo on the packaging box qualify with the U.S. Environmental Protection Agency's ENERGY STAR guidelines for energy efficiency. Products with the ENERGY STAR label are designed to use less energy, help you save money on utility bills, and help protect the environment. ENERGY STAR® is a registered trademark owned by the U.S. government. EMI Statement (European Union Only) This is a class B product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. European Telephone Network Declaration (European Union Only) The product herewith complies with the requirements of the R&TTE Directive 1999/5/EC (Annex II) and carries the CE marking accordingly. However, due to differences between the individual PSTNs provided in different countries/regions, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems, you should contact your equipment supplier in the first instance. European Network Compatibility Declarations (European Union Only) This equipment has been designed to work with analogue DTMF Networks (TBR-21 compliant). This equipment may have internetworking difficulties in PSTN networks that only support Pulse Dialing. Please consult with your network operator for further assistance. 7