HP Pavilion d4500 Getting Started Guide - Page 32
Type 6 connectors: See Configuring audio output with Sound Effect
View all HP Pavilion d4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
3 Connect the rear speaker cable to the black connector that matches the back of your PC. IN 3 6 S For type 3 connectors, the blue Audio Line In connector functions as a rear Line Out when a multichannel audio configuration is activated. 4 Connect the center/subwoofer speaker cable to the gold (or pink) Mic connector that matches the back of your PC. 3 6 S For type 3 connectors, the pink Mic connector functions as a center/subwoofer speaker Line Out when a multichannel audio configuration is activated. 5 Connect the cables to the audio system. 6 Connect the front, rear, and center speakers to the subwoofer. Refer to the speaker documentation. 7 Turn on the PC. NOTE: Always turn on the PC before you turn on the speaker system. 8 Plug in the speaker system power. 9 Turn on the speaker system. 10 After the speakers are connected to the PC, configure the audio software for sound output for your PC model: • Type 3 connectors: See "Configuring audio output with Multi-channel Sound Manager" on page 35. • Type 6 connectors: See "Configuring audio output with Sound Effect Manager" on page 37. • Type 6 connectors, multistreaming: See "Configuring audio output with Realtek HD Sound Effect Manager" on page 39. 26 Getting Started Guide