HP Pavilion dv2500 Drives - Windows Vista - Page 12
Removing an optical disc when no computer power is available
View all HP Pavilion dv2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Removing an optical disc when no computer power is available 1. Insert the end of a paper clip (1) into the release access in the front bezel of the drive. 2. Press in gently on the paper clip until the tray is released, and then pull out the tray (2) until it stops. 3. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces. NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it. 4. Close the media tray and place the disc in a protective case. 6 Chapter 3 Using an optical drive
Removing an optical disc when no computer power
is available
1
.
Insert the end of a paper clip
(1)
into the release access in the front bezel of the drive.
2
.
Press in gently on the paper clip until the tray is released, and then pull out the tray
(2)
until it stops.
3
.
Remove the disc
(3)
from the tray by gently pressing down on the spindle while lifting the outer edges
of the disc. Hold the disc by the edges and avoid touching the flat surfaces.
NOTE:
If the tray is not fully accessible, tilt the disc carefully as you remove it.
4
.
Close the media tray and place the disc in a protective case.
6
Chapter
3
Using an optical drive