HP Pavilion dv3-1000 HP Pavilion dv3 Entertainment PC - Maintenance and Servic - Page 58

Remove the Phillips PM2.5×6.0 screw, that secures the top cover to the computer.

Get HP Pavilion dv3-1000 - Entertainment Notebook PC PDF manuals and user guides View all HP Pavilion dv3-1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

6. Release the ZIF connector to which the TouchPad board cable is connected, and disconnect the cable (2) from on the system board. 7. Disconnect the TouchPad on/off button board cable (3) from the system board. 8. Disconnect the fingerprint reader board cable (4) from the system board. 9. Remove the Phillips PM2.5×6.0 screw (5) that secures the top cover to the computer. 10. Lift the rear edge of the top cover (1) up until the top cover detaches from the base enclosure. 11. Remove the top cover (2). Reverse this procedure to install the top cover. 50 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
6.
Release the ZIF connector to which the TouchPad board cable is connected, and disconnect the
cable
(2)
from on the system board.
7.
Disconnect the TouchPad on/off button board cable
(3)
from the system board.
8.
Disconnect the fingerprint reader board cable
(4)
from the system board.
9.
Remove the Phillips PM2.5×6.0 screw
(5)
that secures the top cover to the computer.
10.
Lift the rear edge of the top cover
(1)
up until the top cover detaches from the base enclosure.
11.
Remove the top cover
(2)
.
Reverse this procedure to install the top cover.
50
Chapter 4
Removal and replacement procedures