HP Pavilion dv5-2000 HP Pavilion dv5 Entertainment PC - Maintenance and Servic - Page 85

Power connector cable

Get HP Pavilion dv5-2000 - Entertainment Notebook PC PDF manuals and user guides View all HP Pavilion dv5-2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 85 highlights

4. Disconnect the USB board cable (1) from the system board. 5. Remove the USB board (2) from the alignment clip built into the base enclosure. 6. Remove the USB board and cable. Reverse this procedure to install the USB board. Power connector cable Description Power connector cable Spare part number 606890-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 49), and then remove the following components: a. Memory module/wireless module compartment cover (see Memory module on page 50) b. Hard drive cover (see Hard drive on page 58) c. Keyboard (see Keyboard on page 64) d. Top cover (see Top cover on page 67) e. Base enclosure bracket (see USB board on page 74) Component replacement procedures 75

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
4.
Disconnect the USB board cable
(1)
from the system board.
5.
Remove the USB board
(2)
from the alignment clip built into the base enclosure.
6.
Remove the USB board and cable.
Reverse this procedure to install the USB board.
Power connector cable
Description
Spare part number
Power connector cable
606890-001
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
49
), and then remove the following components:
a.
Memory module/wireless module compartment cover (see
Memory module
on page
50
)
b.
Hard drive cover (see
Hard drive
on page
58
)
c.
Keyboard (see
Keyboard
on page
64
)
d.
Top cover (see
Top cover
on page
67
)
e.
Base enclosure bracket (see
USB board
on page
74
)
Component replacement procedures
75