HP Pavilion dv5 HP Pavilion dv5 Entertainment PC - Maintenance and Service Gui - Page 91
and the heat sink material locations as shown in the following illustration
View all HP Pavilion dv5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
4. Remove the fan/heat sink assembly (4). NOTE: Due to the adhesive quality of the thermal material located between the fan/heat sink assembly and system board components, it may be necessary to move the fan/heat sink assembly from side to side to detach it. NOTE: The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly and the system board each time the fan/heat sink assembly is removed. Replacement thermal material locations vary by computer model. Computer models equipped with a graphics subsystem with discrete memory have replacement thermal material locations as shown in the following illustration: ● Thermal paste is used on the processor (1) and the heat sink section (2) that services it ● A thermal pad is used on the graphics subsystem chip (3) and the heat sink section (4) that services it Component replacement procedures 81