HP Pavilion dv8100 Memory Modules - Page 4
Remove the battery pack from the computer., Turn the computer upside down.
 |
View all HP Pavilion dv8100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
To add or replace a memory module: 1. Shut down the computer. (If you are not sure whether the computer is off or in hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system.) 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Turn the computer upside down. 5. Remove the battery pack from the computer. 6. Loosen the memory module compartment cover screws 1. 7. Lift the memory module compartment cover 2 away from the computer. Memory Modules 2
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11
-
12
 |
 |
Memory Modules
2
To add or replace a memory module:
1. Shut down the computer. (If you are not sure whether the
computer is off or in hibernation, turn the computer on by
pressing the power button. Then shut down the computer
through the operating system.)
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Turn the computer upside down.
5. Remove the battery pack from the computer.
6. Loosen the memory module compartment cover screws
1
.
7. Lift the memory module compartment cover
2
away from
the computer.