HP Pavilion n6000 HP Pavilion Notebook PC N6000 Series - Reference Guide - Page 111
Startup Problems
View all HP Pavilion n6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Troubleshooting Your Computer Troubleshooting Techniques Startup Problems If the computer doesn't respond when you turn it on • Connect the ac adapter. • Press the blue sleep button to try turning on the unit. • Reset the computer by inserting a straightened paper clip into the system-off switch on the right side of the computer. Then press the blue sleep button to turn it on. • If the computer still doesn't respond, remove the battery and ac adapter, remove any PC cards, and undock the computer if docked. Then plug in the ac adapter again, and reset the computer using the system-off switch. If the computer won't boot from battery power • Make sure the battery is properly inserted and fully charged. Check the battery's charge by removing it and pressing the pad on the back of the battery. The lights show the charge level. • If you have a secondary battery, install it and try starting the computer. • If available, try another battery. If the computer won't boot from the floppy disk drive • Make sure the drive is installed or connected correctly. • Check the boot order in the BIOS Setup utility: 1. Click Start, Shut Down, Restart. 2. When the HP logo appears, press F2 to enter BIOS Setup. 3. Open the Boot menu. 4. If Removable Device is not option 1, use the arrow keys to select Removable Device, and move it to position 1. 5. If an LS-120 drive is also installed, expand the Removable Device category and move the floppy drive to the first position. 6. In the Security menu, make sure the Removable Device Boot setting is Enabled. 7. Press F10 to save and exit BIOS Setup. Reference Guide 111