HP Pavilion n6397 HP Pavilion Notebook PC N6000 Series - Startup Guide - Page 39
Installing a RAM Expansion Module
View all HP Pavilion n6397 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Configuring and Expanding Your Computer Installing a RAM Expansion Module Installing a RAM Expansion Module The computer has no memory (RAM) built in but has two slots that hold two RAM modules. One slot contains a RAM module installed at the factory. You can use both slots to expand your RAM. CAUTION To install a RAM expansion module You'll need a small Phillips screwdriver for these steps. Your computer's chips are extremely sensitive to static electricity, and can be permanently damaged by it. Handle the RAM module only by its edges. Before installing the memory module, discharge your body's static electricity by touching the metal shielding around the connectors on the rear of the computer. 1. Click Start, Shut Down, Shut down. 2. Important: Unplug the ac adapter, if present, and remove the battery. Remove the secondary battery if one is installed. 3. Turn the unit bottom-side up, remove the screw holding the RAM cover, and remove the cover. Startup Guide 39