HP Pavilion p6300 Upgrade and Service

HP Pavilion p6300 - Desktop PC Manual

HP Pavilion p6300 manual content summary:

  • HP Pavilion p6300 | Upgrade and Service - Page 1
    Printed in Upgrading and Servicing Guide
  • HP Pavilion p6300 | Upgrade and Service - Page 2
  • HP Pavilion p6300 | Upgrade and Service - Page 3
    Removing and Replacing the Front Panel
  • HP Pavilion p6300 | Upgrade and Service - Page 4
    computer or be injured from the spinning fan blades. Avoid touching sharp edges inside the computer. NOTE: Computer features may vary by model. 2 Turn off the computer. 3 Disconnect all peripherals and cables from the front and the back of the computer. Disconnect the power cord last. 2 570981
  • HP Pavilion p6300 | Upgrade and Service - Page 5
    4 Loosen the side panel thumbscrew on the back of the computer. 6 Tilt out the top of the side panel, and then lift the panel from the computer. -- 5 Grasp the handle, and pull the side panel about 2.5 cm (1 inch) toward the back of the computer to release it. 7 Locate the three tabs that secure
  • HP Pavilion p6300 | Upgrade and Service - Page 6
    the same as the original part, due to different manufacturers or models. Hewlett-Packard always provides quality parts that meet or exceed your original computer specifications. 1 Hold the front panel over the front of the computer, and then press the left side of the front panel, inserting the tabs
  • HP Pavilion p6300 | Upgrade and Service - Page 7
    the back of the computer. 4 Slide the side panel toward the front of the computer and into place. 6 Reconnect all peripherals and cables, and then turn on the computer. 570981-001 - Removing and Replacing the Front Panel 5
  • HP Pavilion p6300 | Upgrade and Service - Page 8
    6 570981-001 - Removing and Replacing the Front Panel
  • HP Pavilion p6300 | Upgrade and Service - Page 9
    Removing and Replacing an Optical Disc Drive
  • HP Pavilion p6300 | Upgrade and Service - Page 10
    Tools Needed Flathead screwdriver You can use a flathead screwdriver with the following screw (torque screw). Removing an Optical Disc Drive 1 Before you begin servicing the computer, press the Eject button, and remove any CD or DVD from the optical disc drive tray. CAUTION: Static electricity can
  • HP Pavilion p6300 | Upgrade and Service - Page 11
    2 Remove the Pocket Media Drive, if it is present. 5 Loosen the side panel thumbscrew on the back of the computer. 3 Turn off the computer. 4 Disconnect all peripherals and cables from the front and the back of the computer. Disconnect the power cord last. 6 Grasp the handle,
  • HP Pavilion p6300 | Upgrade and Service - Page 12
    7 Tilt out the top of the side panel, and then lift the panel from the computer. -- 9 Swing the front panel open toward the left, and then lift it off the computer. 10 Locate the optical disc drive you want to replace (and also the drive latch for it). 8 Locate the three tabs that secure the front
  • HP Pavilion p6300 | Upgrade and Service - Page 13
    11 Pull out the optical drive latch (1), and then swing it to the left until it is in the center position (2). 13 Disconnect the cables from the drive: The plugs on the cables are keyed and can be inserted only when aligned properly with the connector on the drive. In addition, some plugs have a
  • HP Pavilion p6300 | Upgrade and Service - Page 14
    as the original part, due to different manufacturers or models. Hewlett-Packard always provides quality parts that meet or exceed your original computer specifications. 1 Insert the drive partway into the computer bay. 2 Connect the data (1) and power (2) cables to the back of the drive. 6 537487
  • HP Pavilion p6300 | Upgrade and Service - Page 15
    3 Pull out the optical drive latch (1), swing it to the right (2), and release it into the hole labeled 2 on the computer; then, push in the drive (3). 5 Hold the front panel over the front of the computer, and then press the left side of the front panel, inserting the tabs into the computer holes.
  • HP Pavilion p6300 | Upgrade and Service - Page 16
    back of the computer. 8 Slide the side panel toward the front of the computer and into place. 10 Reconnect all peripherals and cables, and then turn on the computer. 8 537487-001 - Removing and Replacing an Optical Disc Drive
  • HP Pavilion p6300 | Upgrade and Service - Page 17
    Removing and Replacing a Hard Disk Drive
  • HP Pavilion p6300 | Upgrade and Service - Page 18
    features may vary by model. Removing a Hard Disk Drive 1 Before you begin servicing the computer, remove the Pocket Media Drive, if it is present. CAUTION: Static touching any internal parts or electronic components. 2 Turn off the computer. 2 537488-001 - Removing and Replacing a Hard Disk
  • HP Pavilion p6300 | Upgrade and Service - Page 19
    3 Disconnect all peripherals and cables from the front and the back of the computer. Disconnect the power cord last. 5 Grasp the handle, and pull the side panel about 2.5 cm (1 inch) toward the back of the computer to release it. 4 Loosen the side panel thumbscrew on the back of the computer. 6
  • HP Pavilion p6300 | Upgrade and Service - Page 20
    7 Locate the three tabs that secure the front panel to the computer. Pull each of the tabs out slightly, away from the computer, to release the panel. 9 Lay the computer on the side. 10 Locate the hard disk drive cage inside the computer. 8 Swing the front panel open toward the left, and then lift
  • HP Pavilion p6300 | Upgrade and Service - Page 21
    11 Remove the two screws that secure the hard disk drive cage in the computer. 13 Press the cage latch (1), and slide the hard disk drive cage toward the top of the computer (2) to release it. 12 Locate the latch for the hard disk drive cage inside the computer. 14 Lift the cage partway out of
  • HP Pavilion p6300 | Upgrade and Service - Page 22
    15 Disconnect the cables from the hard disk drive in the cage: The plugs on the cables are keyed and can be inserted only when aligned properly with the connector on the drive. In addition, some plugs have a latch that must be pressed or squeezed to release the plug while pulling it from the
  • HP Pavilion p6300 | Upgrade and Service - Page 23
    as the original part, due to different manufacturers or models. Hewlett-Packard always provides quality parts that meet or exceed your original computer specifications. 1 Slide the replacement drive into the hard disk drive cage, with the label facing up and the connectors toward the right (the top
  • HP Pavilion p6300 | Upgrade and Service - Page 24
    5 Locate the four slots inside the computer that match the tabs on the bottom of the hard disk drive cage. 7 Lower the cage into the computer, inserting the four tabs on the bottom of the cage into the computer slots. 6 Hold the cage over the computer, and connect the hard disk drive power and
  • HP Pavilion p6300 | Upgrade and Service - Page 25
    9 Insert and tighten the two screws that secure the cage in the computer. 11 Hold the front panel over the front of the computer, and then press the left side of the front panel, inserting the tabs into the computer holes. Swing the right side of the panel toward the computer, inserting the panel
  • HP Pavilion p6300 | Upgrade and Service - Page 26
    of the computer. 14 Slide the side panel toward the front of the computer and into place. 16 Reconnect all peripherals and cables, and then turn on the computer. 10 537488-001 - Removing and Replacing a Hard Disk Drive
  • HP Pavilion p6300 | Upgrade and Service - Page 27
    Removing and Replacing an Add-In Card
  • HP Pavilion p6300 | Upgrade and Service - Page 28
    (torque screw). Removing an Add-In Card 1 Before you begin servicing the computer, remove the Pocket Media Drive, if it is present. sharp edges inside the computer. NOTE: Computer features may vary by model. 2 Turn off the computer. 3 Disconnect all peripherals and cables from the front and the
  • HP Pavilion p6300 | Upgrade and Service - Page 29
    4 Loosen the side panel thumbscrew on the back of the computer. 6 Tilt out the top of the side panel, and then lift the panel from the computer. -- 5 Grasp the handle, and pull the side panel about 2.5 cm (1 inch) toward the back of the computer to release it. 7 Lay the computer on the side. 8
  • HP Pavilion p6300 | Upgrade and Service - Page 30
    9 On the back of the computer, remove the screw from the bracket cover for the add-in cards. If it is present, also remove the additional screw that secures a large graphics card. 11 If present, disconnect any cables connected to the card. 10 Lift off the bracket cover. 12 Look at the add-in card
  • HP Pavilion p6300 | Upgrade and Service - Page 31
    the same as the original part, due to different manufacturers or models. Hewlett-Packard always provides quality parts that meet or exceed your original computer specifications. 1 Align the edge of the add-in card with the slot in the computer, and then press the card straight down until it is fully
  • HP Pavilion p6300 | Upgrade and Service - Page 32
    3 Look at the bracket cover for the two hooks that fit over the two slots on the back of the computer. 4 Replace the bracket cover onto the back of the computer: Align the bracket cover hooks over the slots on the computer, and then slide the bracket cover into place against the add-in cards. 6
  • HP Pavilion p6300 | Upgrade and Service - Page 33
    5 Insert and tighten the bracket cover screw. If it is present, also insert and tighten the additional screw that secures a large graphics card. 7 Hold the side panel over the side of the computer with the front edge of the panel about 2.5 cm (1 inch) from the front of the computer. 6 Set the
  • HP Pavilion p6300 | Upgrade and Service - Page 34
    9 Slide the side panel toward the front of the computer and into place. 11 Reconnect all peripherals and cables, and then turn on the computer. 10 Tighten the side panel thumbscrew on the back of the computer. 8 537489-001 - Removing and Replacing an Add-In Card
  • HP Pavilion p6300 | Upgrade and Service - Page 35
    Removing and Replacing the Memory Card Reader
  • HP Pavilion p6300 | Upgrade and Service - Page 36
    torque screw). Removing the Memory Card Reader 1 Before you begin servicing the computer, remove the Pocket Media Drive, if it is present edges inside the computer. NOTE: Computer features may vary by model. 2 Turn off the computer. 3 Disconnect all peripherals and cables from the front and the
  • HP Pavilion p6300 | Upgrade and Service - Page 37
    4 Loosen the side panel thumbscrew on the back of the computer. 6 Tilt out the top of the side panel, and then lift the panel from the computer. -- 5 Grasp the handle, and pull the side panel about 2.5 cm (1 inch) toward the back of the computer to release it. 7 Locate the three tabs that secure
  • HP Pavilion p6300 | Upgrade and Service - Page 38
    8 Swing the front panel open toward the left, and then lift it off the computer. 10 Remove the screw that secures the reader in the computer. 9 Locate the memory card reader at the top of the front of the computer. 11 Push the reader slightly to the left to release it. 4 571044-001 - Removing
  • HP Pavilion p6300 | Upgrade and Service - Page 39
    , due to different manufacturers or models. Hewlett-Packard always provides quality parts that meet or exceed your original computer specifications. 1 Connect the cable to the back of the reader. 13 Turn over the reader, press the latch in the center of the plug (1), and then pull the plug (2) from
  • HP Pavilion p6300 | Upgrade and Service - Page 40
    3 Slide the reader in and slightly to the right to lock the tab into the slot (1) and to align the screw hole on the top of the reader with the computer screw hole (2). 5 Hold the front panel over the front of the computer, and then press the left side of the front panel, inserting the tabs into
  • HP Pavilion p6300 | Upgrade and Service - Page 41
    back of the computer. 8 Slide the side panel toward the front of the computer and into place. 10 Reconnect all peripherals and cables, and then turn on the computer. 571044-001 - Removing and Replacing the Memory Card Reader 7
  • HP Pavilion p6300 | Upgrade and Service - Page 42
    8 571044-001 - Removing and Replacing the Memory Card Reader
  • HP Pavilion p6300 | Upgrade and Service - Page 43
    Removing and Replacing Memory
  • HP Pavilion p6300 | Upgrade and Service - Page 44
    minutes Before You Begin Use the product specification for your model to find the correct features may vary by model. Removing Memory 1 Before you begin servicing the computer, remove the Pocket Media Drive, if it is electronic components. 2 Turn off the computer. 2 537486-001 - Removing and
  • HP Pavilion p6300 | Upgrade and Service - Page 45
    3 Disconnect all peripherals and cables from the front and the back of the computer. Disconnect the power cord last. 5 Grasp the handle, and pull the side panel about 2.5 cm (1 inch) toward the back of the computer to release it. 4 Loosen the side panel thumbscrew on the back of the computer. 6
  • HP Pavilion p6300 | Upgrade and Service - Page 46
    on each end of the memory socket to release the memory module. 8 Locate the memory sockets on your computer motherboard. NOTE: The location and number of memory sockets may vary with the motherboard model in your computer. 10 Touching only the top edge of the memory module, lift it out of the
  • HP Pavilion p6300 | Upgrade and Service - Page 47
    as the original part, due to different manufacturers or models. Hewlett-Packard always provides quality parts that meet or exceed your original computer specifications. 1 Touching only the top edge of the memory module, locate the notch on the bottom edge. NOTE: Each type of memory has a different
  • HP Pavilion p6300 | Upgrade and Service - Page 48
    4 Set the computer upright. 6 Place the bottom of the panel on the computer, inserting the tabs on the inside of the panel into the rail slots on the computer. Swing the top of the panel toward the computer, inserting the top tabs into the rail slots. 5 Hold the side panel over the side of the
  • HP Pavilion p6300 | Upgrade and Service - Page 49
    8 Tighten the side panel thumbscrew on the back of the computer. 9 Reconnect all peripherals and cables, and then turn on the computer. 537486-001 - Removing and Replacing Memory 7
  • HP Pavilion p6300 | Upgrade and Service - Page 50
    © Copyright 2009 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Version: 1.0
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50

Printed in
Upgrading and Servicing Guide