HP Pavilion xe700 HP Pavilion PCs - (English) Seagate Hard Drive U Series 10 M - Page 32
Identify Drive command
View all HP Pavilion xe700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
24 U10 Family Product Manual, Rev. A Command name Command code (in hex) Write Multiple C5H Write Sectors 30H, 31H ATA-standard power-management commands Check Power Mode 98H or E5H Idle 97H or E3H Idle Immediate 95H or E1H Sleep 99H or E6H Standby 96H or E2H Standby Immediate 94H or E0H ATA-standard security commands Security Set Password F1H Security Unlock F2H Security Erase Prepare F3H Security Erase Unit F4H Security Freeze Lock F5H Security Disable Password F6H 3.1.2 Identify Drive command The Identify Drive command (command code ECH) transfers information about the drive to the host following power up. The data is organized as a single 512-byte block of data, whose contents are shown in the table on page 25. All reserved bits or words should be set to zero. Parameters listed with an "x" are drive-specific or vary with the state of the drive. See Section 1 of this manual for default parameter settings. The following commands contain drive-specific features that may not be included in the Draft ATA-5 Standard.