HP Pavilion xt183 HP Pavilion ze5100 Series and HP Omnibook xe4400 Series Note - Page 27
To reset the computer, To change the boot device
View all HP Pavilion xt183 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Basic Operation Operating Your Computer To reset the computer Occasionally, you may find that Windows or the computer has stopped responding, and will not let you turn the computer off. If this happens, try the following in the order listed. • If possible, shut down Windows: Windows XP: press CTRL+ALT+DEL, and then click Shut Down, Restart. Windows 2000: press CTRL+ALT+DEL, click Shut Down, and press the power button to restart. -or, if this fails- • Press the power button for 4 seconds until the display shuts down, and then press the power button again to restart. -or, if this fails- • Insert the tip of a ballpoint pen into the reset button on the bottom of the computer, and then press the power button to restart. To change the boot device The computer normally boots from its internal hard disk. You can also boot the computer from a floppy disk drive, a CD-ROM drive, or an internal network interface card. 1. Click Start, Turn Off Computer (or Shut Down), Restart. 2. When the HP logo appears, press ESC to display the Boot menu. 3. Use the arrow keys to select the boot device, and press ENTER. Startup Guide 27